7214-B-MP FAG Angular Contact Bearing 70x125x24mm Sealed Double lip Viton metric rotary

Double lip Viton metric rotary shaft oil seal with garter spring 45mm inside x 60mm outside x 10mm wide

Inside length: 2483mm / 95 inches

F 182 mm Raceway diameter inner ring

Outside length 1499mm

are used instead of stainless steel or steel balls in various industrial applications at lower cost than metal balls

7214-B-MP FAG Angular Contact Bearing 70x125x24mm Sealed Double lip Viton metric rotaryFAG Single row angular contact ball bearings are particularly suitable where: Bearing arrangements must support combined loads, i. e. radial and axial loads acting simultaneously Moderate to high loads are present on one side Rigid axial guidance is required The bearing arrangement must be axially clearance free or preloaded High speeds are required under higher radial and axial loads The bearing arrangement is to run quietly in addition to meeting